Back to explore


537 Chiaro Ambra

Composite of granules selected industrially and created in a large commercial slab with a maximum size of 118” x 48”, a nominal thickness of ¼” and a weight of approximately 2.87 lbs/sqf.
It is obtained through vibro-compression and consists of about 93% selected granules of various types such as post-consumer recycled glass, recycled pre-consumer porcelain, glass mosaic, quartz, granite, mixed together, in different sizes, with a minimum quantity of polyester resin and coloured powder pigments.

Size and dimensions

  • 39" x 5 3/4" 39" x 5 3/4"
  • 12" x 12" 12" x 12"
  • 24" x 12" 24" x 12"
  • 24" x 24" 24" x 24"
  • 48" x 24" 48" x 24"
  • 118" x 24" 118" x 24"
  • 48" x 48" 48" x 48"
  • Custom Custom
  • 118" x 47" 118" x 47"


  • Stone & glass


  • Smooth


  • Stone & glass Stone & glass


  • Kitchen
  • Bedroom
  • Living room
  • Flooring commercial
  • Flooring residential
  • Hotel
  • Showroom
  • Work spaces
  • Bathroom
  • Outdoor
  • Swimming pools and Spa


  • Modern
  • Natural
  • Traditional
  • Transitional
  • Contemporary


  • Low VOC emission
  • Recycled content
  • Recycled content foor LEED
How to buy


The large 118” x 48” format enables covering large areas with relatively few joints.
The lightness of the material, combined with its outstanding technical properties, allows for a variety of uses, especially in those environments where weight is critical, like apartments, ships and partition walls.
It is easy to cut on site, using the correct diamond cutting disc, and is sufficiently flexible to attain a radius or more than 27 ½”, so is suitable for cladding curved surfaces. The agglomerate’s slim dimensions enable it to be used on top of existing surface materials.


This TREND Origina is suitable for wall cladding and flooring, even in areas with continuous traffic, both indoors and outdoors (OUTDOOR: NOT ALL COLORS CAN BE USED OUTDOOR. SOME COLORS, ESPECIALLY LIGHT COLORS, CAN SHOW YELLOWING AFTER 5 YEARS).
Using WATER-JET cutting, personalized designs or inserts can be created, or standard sizes cut so that sheets can be laid side by side, creating an effect of continuity.
It is also suitable for covering steps, raised floors and baseboards, as well as contouring around curved surfaces like columns.
For cladding surfaces such as tables and countertops, the Skin method is recommended, which provides for the application of a wooden support and assists with the creation of finished borders and seamless bonding to hide the joints.

Technical area